200 Series

Tool 200i1000L125C

Aluminum likes to weld itself to your cutter right when you need clean walls on a deep pocket. The heavier the cut, the worse it gets. You end up with tool marks that look like someone dragged a dull screwdriver through soft metal.

This 1" diameter cutter runs three flutes with a 0.125" corner radius.
The radius distributes cutting forces across more edge length, reducing the pressure spike that triggers aluminum adhesion.
Three flutes maintain your feed rate while dropping chip load per tooth.
That lower load per tooth is what actually prevents built-up edge formation.
TiB₂ coating handles the demanding passes where uncoated tools start to grab.
The coating stays chemically inert with aluminum while managing the heat from heavier cuts.
High helix geometry moves chips out before they can weld to the flute.