930 Series

Tool 930i3236B

Sharp corners in dovetail cuts tend to chip when the tool exits the cut. The stress concentration at a perfectly sharp edge creates failure points that reduce tool life in production runs.

The 930i3236B addresses this with a sharp corner radius that maintains clean geometry while providing enough edge support to resist chipping.
Three flutes balance surface finish with chip evacuation in the narrow 0.1969" neck geometry required for undercut access.
AlTiN coating extends tool life in steel applications where heat buildup typically limits carbide performance in these confined cutting conditions.
The 90-degree included angle produces standard dovetail profiles for workholding fixtures and T-slot preparation.
The 0.5" cutting diameter handles most common slot widths while the reduced neck diameter provides clearance for deep undercuts in steel, aluminum, and most machinable metals.